The DALOG^® CMS^® D-650 is a state of the art data recorder. A high-performance dual-processor system allows data processing in real time. It can be connected up to 64 analog and 12 digital inputs, 2 speed inputs, 3 analog and 12 digital outputs. Through the standardized interfaces signals of PLC, DCS and other control systems via fieldbus can be collected, processed and saved. This allows a bi-directional communication between DALOG^® and DCS.

The analog channels record continuously up to 25 kHz per channel. The storage capacity is 4Gbyte.

DALOG^® D-CMS^® 650 can also be used in a Master-Slave compound, with the smaller D-CMS^® 325 to monitor large systems with many measuring points and different equipment assemblies at low cost.

Remote access for reading the data, changing the configuration via VPN, radio or modem is possible.

Data Sheet DALOG® D-CMS® 625
Analog Inputs	32 channels / 14 bits
Voltage / current inputs	(0 ... 5) V, (0 ... 10) V, ± 5V, ± 10V, (0 ... 20) mA single ended
Digital inputs	12 channels
Speed inputs	2 channels
Analog outputs	3 channels / (4 ... 20) mA
Digital Outputs	12 channels
Sampling rate	800kHz
Real Time Clock	Yes
Memory Capacity	4 GByte
Serial interface	2 x RS 232
Ethernet port	1 x Ethernet (TCP/IP)
Supply voltage	(8 ... 32) VDC
Operating Temperature	(-30 ... 80) °C
Protection	IP54
Connector	SUB-D
Housing	Aluminium
Dimensions	280 x 130 x 65 mm
Optional
Analog inputs	64 channels / 14 bit differential-ended
Protection	IP 65
CAN Bus Interface	1 x CAN Bus
Connections	upon request